How to Resolve Galaxy Watch5 Display Backlight Bleed

Are you experiencing backlight bleeding on your Galaxy Watch5 display? This issue can be frustrating as it appears as light leakage from the edges or corners. It is usually caused by pressure on the panel, adhesive problems, or gaps in the components.

However, with some troubleshooting, it may be possible to reduce or even eliminate the backlight bleed.

Common Causes

Galaxy Watch5 display backlight bleed can be caused by a number of factors, some of which are quite common.

• The adhesive around the panel becoming loose over time.
• External pressure on the display glass from bumps or drops.
• Pressing on the screen edges inadvertently over time.
• Tiny gaps between the panel and bezel allowing light through.
• Low quality or defective LED backlights used in the panel.
• Manufacturer assembly defects creating panel gaps.

Troubleshooting Procedures

If you’re experiencing backlight bleed on your Galaxy Watch5 display, here are some step-by-step troubleshooting tips to help reduce it.

Check for Panel Damage

Basically, you just need to check the display glass and body for any cracks or external damage that may allow light to pass through. This is important because any direct external damage can cause the panel to become misaligned, which can lead to light leakage from the LED edges. So, make sure to inspect the area carefully to avoid any potential issues.

To check:

1. Power off the watch and examine the glass surface for any cracks or fractures.
2. Look along the edges and corners, checking for gaps between the glass and the body.
3. Press gently on the bezel to check if pressure temporarily reduces light bleed.
4. If physical damage is present, contact Samsung about repair options.

Try a Watch Face with Black Background

To minimize the subtle backlight bleed around the edges of your watch, switch to an all-black watch face. By using solid black backgrounds, the bleed becomes less visible and distracting when using the watch.

To change the watch face:

1. Open the Galaxy Wearable app on your paired smartphone.
2. Select Watch Faces from the menu.
3. Browse faces and select an all-black or very dark one to apply to your device.
4. Check if the backlight bleed is less noticeable versus lighter faces.

Disable Always On Display

Backlight bleed refers to the light that leaks out from the edges of the screen, and it can become more pronounced over time if the screen is left on for extended periods. Always On Display is a feature that keeps the screen partially active even when the device is not in use, which can exacerbate this problem. By turning off this feature, you can give your screen a break and minimize the risk of backlight bleed.

To turn off:

1. Open device settings and tap Display.
2. Select Always On Display.
3. Toggle the switch to disable the feature.
4. Monitor if display issues improve after keeping the screen fully powered down when idle.

Contact Samsung Support

If you are experiencing persistent bleeding on your Samsung device’s screen that is causing significant distraction, it is recommended that you contact Samsung support to inquire about warranty coverage or paid repair options. In the case of excessive backlight bleeding or dark spots, which may indicate component failure, it may be necessary to seek professional repair services to replace the panel, LEDs, or associated circuitry.

To reach support:

1. Locate your Galaxy Watch5 receipt and warranty info.
2. Call Samsung support and describe the backlight bleed issue.
3. Discuss repair expectations and costs, if needed, out of warranty.
4. If advisable, schedule a service appointment for evaluation and panel repair/replacement.

With some diligent troubleshooting and care, you may be able to successfully minimize the annoying backlight bleed on your Galaxy Watch5’s display. Be sure to also keep the watch cushioned in its case and prevent drops or hard impacts.